Description of the Simplex Metered Commercial Water Softener 50-litre (1inch) Flow 2.00m3/HR / Capacity 8.3.m3
- #Product Info#
A single vessel system that is supplied with a meter controlled valve which means that the unit only regenerates based upon the volume of soft water used.
Typical applications are where the usage per day has been estimated and does not vary hugely.
These units are ideal where 24-hour soft water is NOT required.
The volume of softened water is calculated by the hardness of your water supply, the capacity of the water softener and usage.
Choose from the 20-litre, 30, 50, 60, 75, 100 & 125-litre Simplex Water Softeners depending on the required flow rate and soft water capacity.
The Simplex Metered Commercial Water Softener (1 inch connections) is very economical when it comes to using salt and regeneration water.
- #Spec & Diagram#
CW50 Metered Water Softener Specification:
Resin Volume : 50
Vessel : 10x54
Flow : 2.00m³
Peak Flow : 3.00 m³
Capacity 8.3m³ @ 300ppm
Valve Type : WS1
Salt (kg) : 7.5
Vessel Valve Height (H1) 1565mm
Connection Height (H2) 1431mm
Brine Tank Height (H3) 950mm
Vessel Width (D1) 267mm
Brine Tank Width (D2) 365mm x 430mm (rectangle tank )
-
#Spec & Install Instructions#
Call us for advice. Tel: 0845 10 80 680 / 01403 701970
|