Description of the Simplex Metered Commercial Water Softener 150-litre (1.5inch) Flow 6m3/HR Capacity 25 m3
- #Product Info#
A single vessel system that is supplied with a meter controlled valve which means that the unit only regenerates based upon the volume of soft water used.
Typical applications are where the usage per day has been estimated and does not vary hugely.
These units are ideal where 24-hour soft water is NOT required.
The volume of softened water is calculated by the hardness of your water supply, the capacity of the water softener and usage.
Choose from the 125 litre, 150, 200, 250, 350-litre Simplex Water Softeners depending on the required flow rate and soft water capacity.
The Simplex Metered Commercial Water Softener (1.5 inch connections) is very economical when it comes to using salt and regeneration water.
- #Spec & Diagram#
CW150 Metered Water Softener Specification:
Resin Volume : 150
Vessel : 16x65"
Flow : 6m³
Peak Flow : 9m³
Capacity 25m³ @ 300ppm
Valve Type : WS1.5
Salt (kg) : 22.5
Vessel Valve Height (H1) : 1862mm
Connection Height (H2) : 1713mm
Brine Tank Height (H3) : 1150mm
Vessel Width (D1) : 406mm
Brine Tank Width (D2) : 880mm (diameter)
-
#Spec & Install Instructions#
Call us for advice. Tel: 0845 10 80 680 / 01403 701970
|
